|
|
Satcom Frequency Converters and Conversion Products |
Peak Communications Ltd is a high quality designer, manufacturer and supplier of commercial and military satellite communications equipment. Peak Communications supplies to major telecommunications companies, system integrators, satellite users and defence agencies worldwide
UPC7000 Up-Link Power Control Unit & Expansion unit
|
|
The UPC7000 series are next generation Up-Link Power Control units that measure the link’s loss's from a Satellite Beacon Receiver signal and subsequently control the Up-Link power via a number of adjustable IF or L-Band Attenuators. the UPC7000 series can be supplied with an optional internal Beacon, providing a compact ‘total solution’ in only 1RU of rack space. |
|
|
The EXP010 is an expansion unit for the UPC7000series of automatic UpLink power controllers. It can house up to 10 MPC001 attenuation channels, each of which are modular, ‘hot-swappable’ and can be inserted/ replaced in the EXP010 unit from the rear without the need to remove power or disturb the other channels in any way |
Agile Converters - Rack Mount or Remote Mount
|
|
|
The P7000 range of agile converters are the latest generation of fully synthesised Up and Downconverters, which provide a low-cost solution for systems requiring an IF interface at 70MHz +/-18MHz or 140MHz +/-36MHz and conversion to/from either L-Band or SHF frequencies. |
Block Converters - Rack Mount or remote mount.
Modular
Hot-Swappable
Designed to take the output of an UpConverter or modem at L band and provide the
frequency UpConversion to SHF Bands (BUC) or the SHF output from an LNA and
provide the frequency DownConversion to L-Band (BDC).
Fixed Frequency Converters - Rack Mount or remote
mount
The F1200 is a fixed frequency, fixed gain IF to L-Band Up and Downconverter.
The F1200 provides a low-cost solution for systems requiring conversion between
70 MHz +/- 18 MHz (or 140MHz +/- 36 MHz) and L-Band. The units can be used to
cost effectively interface L-Band modems with 70/140MHz transceivers or
70/140MHz modems to L-band transceivers.
Line Amplifiers
|
|
These High Grade units are designed to boost the L-Band signal in typically cross-site applications and they are offered in both Rack and remote mounted configurations to suit various applications . modular hot-swappable with optional integral 1+1 redundancy switching |
Beacon Receivers
|
|
Agile Satellite tracking
receivers providing a DC output proportional to a CW satellite beacon
for telemetry and control applications in typically medium to large
sized earth stations. |
Test Loop Translators - Rack Mount / Remote Mount
|
|
|
Frequency translation, typically used to monitor the output of a transmit path. Translations available include SHF Tx frequencies to L-band, from Tx to Rx band in the same SHF segment, or between various SHF bands. |
Custom Build
Specials and Custom Build
capabilities ;
• Custom Frequency Converters , • Integral block upconverters for KPAs, TWTAs or
SSPAs
• Signal conditioning units , • Station Reference Routing And Conditioning
• IF / SHF Distribution Systems, • Earth Station Remote Monitoring And Switching
Systems • Redundant Ku-Band Signal Amplifiers, • LNB Driver Units, • LNB
Redundancy Control Units
for datasheets please visit www.peakcomm.co.uk